USB 3.2 Type A Gen 1 2-in-1 Card Reader with 20cm USB A Extension Cable
This USB 3.0 Type-A SD/TF card reader features a 2-in-1 design with a 0.2-meter USB A 3.0 extension cable, extending the distance between your laptop or desktop USB A connector and the card reader up to 20cm maximum.
The 2-in-1 card reader allows simultaneous reading and writing from two memory cards, eliminating the need for constant unplugging and re-plugging. USB 3.0 technology enables data transfer rates of up to 104MB/s.
Key Features
- Compact travel design with USB 3.0 Type-A extension cable
- Supports SD/SDHC/SDXC/microSD/microSDHC/microSDXC cards
- Compliant with USB 3.2 Gen 1 specifications
- Transfer rates up to 5 Gbit/s
- Slim, elegant aluminum housing
- Plug and play - no driver installation required
- Hot swap support
- Compatible with Android, Chrome OS, Mac OS, Windows, and Linux systems
- Maximum memory card capacity: up to 2 TB
Technical Specifications
Input/Output Connections
Input: 1x USB 3.0 Type-A male cable connector, 1x Type-C 5V DC Port
Output: 1x microSD, 1x SD (can be used simultaneously)
Card Reader Slot Compatibility
- Micro SD slot: microSD / microSDHC / microSDXC / TransFlash
- SD slot: Secure Digital, SDHC, SDXC, MultiMedia Card, MMC 4.0, MMC Dual Voltage, MMC mobile, RS-MMC
- Supports miniSD, microSD, microSDHC, microSDXC, MMC Micro via adapter
Flash Card Specifications Support
- SD 1.0 / 1.1 (SD - Secure Digital, up to 2GB)
- SD 2.0 (SDHC - Secure Digital High Capacity, up to 32GB)
- SD 3.0 (SDXC - Secure Digital eXtended Capacity, up to 2TB)
- MMC and eMMC 3.x / 4.0 / 4.1 / 4.2 / 4.3 / 4.4 / 4.5 / 5.0 (8-bit)
- SD 3.01 and SD Jukebox applications (CPRM functions)
- Ultra High Speed UHS-I support (SDR12/SDR25/SDR50/DDR50/SDR104) speeds up to 104 MB/s
- ECC (Error Correction Code) and CRC (Cyclic Redundancy Check) functions
- 2 LUN - appears as two disk drives in file managers
- FAT 12 / 16 / 32, NTFS, exFAT (FAT 64) file format support
Additional Features
- SuperSpeed USB - USB 3.2 Gen 1 interface (formerly USB 3.1 Gen 1 / USB 3.0)
- Compatible with USB 3.2 Gen 2, backward compatible with USB 2.0 and USB 1.1
- Transmission rates: 1.5 / 12 / 480 / 5000 Mbit/s (low / full / high / super speed)
- Full Plug and Play and Hot Swap support
- Connects via USB Type C male or A male connector
- Phone connection support via microUSB connector with OTG adapter
- USB-bus powered with External Power DC5V1A Port for external power support when needed
- Dimensions: 27.15 x 32 x 12.3 mm (with caps attached)
- Net Weight: 15 g
Supported Operating Systems
- MS Windows XP / Vista / 7/8 / 8.1 / 10 and later
- Windows Server 2003 / 2008 / 2012 / 2016 and later (all 32- and 64-bit versions)
- Mac OS X 10.x and higher
- Linux with 2.4.x kernel and higher
- Android all versions
Note: Drivers are included with supported operating systems and will be installed automatically.
